Saltar al contenido

Printing Replacement Parts: Fix the Thing Instead of Replacing It

30 de septiembre de 2026 · 27 min

Notas del episodio

A dishwasher basket wheel snaps, a fridge shelf clip crumbles, the bracket on a roller blind gives way, and suddenly a perfectly good appliance is heading for the kerb over a few grams of plastic. This episode is about the most useful thing a 3D printer does in an ordinary home: making the small part nobody sells any more. We walk through real examples, how to find or create a model, which material suits which job, how to design a part that actually fits, where the safety limits are, and how right-to-repair law in Europe and Australia is shifting the ground under manufacturers.

You'll come away understanding the four ways to get a model for a broken part (searching model sites by part number, measuring with a $20 digital calliper and drawing it yourself, scanning or photogrammetry, and the small but growing list of manufacturers such as Philips and Miele that publish official files); which material to choose, from PLA for indoor low-stress parts to PETG and ASA for heat and sun, TPU for flexible feet and gaskets, and resin for tiny detailed gears; the design rules that make parts fit and last, including 0.2 to 0.4 mm clearances, orienting the print so layer lines do not carry the load, and making the part thicker than the original; the list of things you should not print, from anything safety-critical or pressurised to food-contact items and high-heat locations; and where the EU Right to Repair Directive and Australia's Productivity Commission recommendations have actually landed as of 2026.

For anyone who has ever stared at a broken clip and wondered whether the whole appliance really needs replacing, plus a practical tip: print a quick test coupon of the critical dimension before committing to the full part.

Need something printed? Upload your STL, 3MF, OBJ or STEP file at www.3dprinting.zone for an instant price, shipped Australia-wide.

Sources: Prusa Knowledge Base; CNC Kitchen; Tom's Hardware; Right to Repair Europe; Australian Productivity Commission; Australian Treasury.

Todos los episodios de 3D Printing Zone

Ajustes

Visualización

Idioma

Determina qué emisoras ves primero en la página de inicio.

Historial

Las emisoras y episodios escuchados recientemente y tus últimas búsquedas solo se guardan en este navegador.

Avisos

Un breve aviso cuando un pódcast que sigues tiene un episodio nuevo. Puedes desactivar pódcast concretos con la campana de su página.

Cuenta

Guarda tus favoritos: en la app y en la web.

Atajos de teclado

/
Abrir búsqueda
Espacio
Reproducir o pausar
← →
En el reproductor: 15 s atrás, 30 s adelante (episodios) · en una fila: siguiente tarjeta
↑ ↓
En una fila: destino dentro de la tarjeta
Inicio / Fin
En una fila: primera o última tarjeta
Esc
Cerrar ventana o menú
?
Este resumen
Reproduciendo ahora

Ir a la emisora

A continuación

    Añade episodios con «A continuación»: sonarán después del episodio actual.