Aller au contenu

Walls vs Infill: Why the Outline of a 3D Print Carries the Load

27 octobre 2026 · 26 min

Notes de l’épisode

Most people chasing a stronger 3D print reach for the infill slider. The testing says they are usually turning the wrong dial. In this episode we look at walls, also called perimeters or wall loops: the solid outlines a printer traces around every layer, and why adding a couple more of them so often beats piling on infill for the same plastic.

You'll come away understanding what walls and perimeters are and why two is the out-of-the-box setting; the simple physics of why the outside of a part does most of the work when it bends, with a tube-versus-rod example; what CNC Kitchen's hook tests and HackSpace magazine's bending test actually measured, including a same-weight comparison where extra walls won by about 22 per cent; where infill still earns its place (crushing loads, top surfaces, flexible TPU); and practical settings, from three walls for everyday parts to four to six for brackets and hooks, plus wider lines, Arachne and the extra walls you get around screw holes.

Handy if you print functional parts at home, or if you are designing a part to have printed and want it to survive real use without paying for plastic it doesn't need.

Need something printed? Upload your STL, 3MF, OBJ or STEP file at www.3dprinting.zone for an instant price, shipped Australia-wide.

Sources: CNC Kitchen (Stefan Hermann); HackSpace magazine, "Experiments with strong 3D prints"; Prusa Knowledge Base; OrcaSlicer Wiki; Bambu Lab Wiki; UltiMaker Cura settings definitions.

Tous les épisodes de 3D Printing Zone

Paramètres

Affichage

Langue

Détermine les stations affichées en premier sur la page d’accueil.

Historique

Les stations et épisodes écoutés récemment et tes dernières recherches sont seulement enregistrés dans ce navigateur.

Notifications

Un court message quand un podcast que tu suis publie un nouvel épisode. Désactive un podcast précis avec la cloche sur sa page.

Compte

Enregistrez vos favoris – dans l’app et sur le site.

Raccourcis clavier

/
Ouvrir la recherche
Espace
Lecture ou pause
← →
Dans le lecteur : 15 s en arrière, 30 s en avant (épisodes) · dans une rangée : tuile suivante
↑ ↓
Dans une rangée : cible dans la tuile
Début / Fin
Dans une rangée : première ou dernière tuile
Esc
Fermer la fenêtre ou le menu
?
Cet aperçu
En cours de lecture

Voir la station

À suivre

    Ajoutez des épisodes avec « À suivre » – ils seront lus après l'épisode en cours.