Zum Inhalt springen

"You have a lot of splaining to do"

17.09.2025 · 53 Min.

Shownotes

Gotchas and head-scratchers are the theme this episode, as Mike, Paul, and Colleen help an owner with a pitted camshaft, an inop instrument, a faulty vacuum line, and ops procedures.

Email [email protected] for a chance to get on the show.

Join the world's largest aviation community at aopa.org/join

Full episode notes below:

Mike had two airplanes over the past 10 years with crankshaft pitting, despite regularly flying, hangaring, and using an engine dehydrator. He's wondering if there's anything else he can do to keep the rust away. The hosts focus on the timing of the events and consider that maybe Mike was caught up in a period when Continental had manufactured some sub-standard parts. They are confident Mike did the right thing by having his mechanic use the guidance in Continental's Service Information Directive 05-1B, which describes how to inspect and then when to replace the cam if spalding is found.


Trevor has a Cessna 152 and he noticed that the vacuum line near the static sump had been bumped and was disconnected. It's a simple assembly that doesn't require tools to replace, only some teflon thread. He's wondering if that would be acceptable to do under the regulations for preventative maintenance. The hosts agree that it fits the definition of preventative maintenance perfectly, but that changing out the line would trigger the requirement for a static system leak-down test, which doesn't meet the definition. So, although a pilot could probably replace the line, he/she would have to hire a mechanic to do the leak-down test anyway.


Brian is the manager of a flying club with a Cherokee that has a persistent inop flag on the S-Tec 30 turn coordinator, and he wants to know if you can label only the inop flag as inop. Mike thinks that's sound logic, but Paul and Colleen are a little more skeptical. When Brian says the airplane is used for checkrides, the hosts agree that DPEs are probably not going to allow it, and to placard the entire autopilot inop.


Tim is wondering how many times to cycle the propeller during the run-up checks. The hosts all agree that once is sufficient, unless there's a need to do more. That might be because the oil is very cold, the hub is large, or there wasn't a good response on the first try. But all the parameters that need to be checked can be done in one pull, and a second and third pull are unnecessary and cause unneeded strain on the engine.

Alle Folgen von Ask the A&Ps

Einstellungen

Darstellung

Sprache

Bestimmt, welche Sender dir auf der Startseite zuerst gezeigt werden.

Verlauf

Zuletzt gehörte Sender und Folgen und deine letzten Suchen liegen nur in diesem Browser.

Hinweise

Ein kurzer Hinweis, wenn ein Podcast, dem du folgst, eine neue Folge hat. Einzelne Podcasts stellst du über die Glocke auf ihrer Seite ab.

Konto

Favoriten speichern – in der App und auf der Website.

Tastenkürzel

/
Suche öffnen
Leertaste
Abspielen oder anhalten
← →
Im Player: 15 s zurück, 30 s vor (Folgen) · im Regal: nächste Kachel
↑ ↓
Im Regal: Ziel innerhalb der Kachel
Pos1 / Ende
Im Regal: erste bzw. letzte Kachel
Esc
Fenster oder Menü schließen
?
Diese Übersicht
Läuft gerade

Zur Senderseite

Als Nächstes

    Folgen mit „Als Nächstes“ vormerken – sie laufen nach der aktuellen Folge.